Ultra high strength, free flowing, non-shrink cementitious grout

FLOWGROUT 60 is based on specially processed cement containing fillers and additives. FLOWGROUT 60 is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT EP resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used. This reduces the heat of hydration.

BENEFIT

• Prepacked, factory controlled consistent material needing only addition of water
• Shrinkage offset by expansion to ensure original volume is retained
• Free flowing, self levelling grout
• Easy placement and filling of underbases of machinery
• Non-metallic, non-toxic and chloride free.
• Holds up to industrial machinery vibration & impact.
• Extended work time for easy placement.
• Excellent adhesion to concrete and steel.
• Non staining.
• High ultimate strength and durability.

USES

FLOWGROUT 60 can be used to Bolt pockets and base plate grouting of all equipment, Crane, stanchion bases and all types of machinery with dynamic load.

VISIT: http://www.fairmate.com/ or http://www.fairmateshoppee.com/